Note:
❏ If paper cassette 1 is at the back and cannot be slid out, you can slide it out by turning the printer o and back on
again.
❏ You can load paper even if you pull out paper cassette 1 completely.
Li
up paper cassette 1 slightly, and then pull it
out.
4.
Slide the edge guides to their maximum position.
5. With the printable side facing down, load paper until it touches the back of paper cassette 1.
c
Important:
Do not load dierent types of paper in the paper cassette.
Follow the instructions supplied with the stickers to load one sheet of Epson Photo Stickers 16. Do not load the
loading support sheets into this product.
User's Guide
Loading Paper
63
To Next Page
Loading...
