8. Raise the control panel.
9. Check the paper size and paper type settings displayed on the control panel. To use the settings, select Done.
To change the settings, select the item that you want to change, and then go to the next step.
To select an item, move the focus to the item using the
u
d
l
r
buttons, and then press the OK button.
Note:
❏ By registering frequently used combinations of paper size and paper type as a favorite, you do not need to set them
each time. You can make paper settings just by selecting the registered preset.
To register a preset, select Favorite Paper Settings, press
r
on the next screen and then specify the paper size and
paper type.
❏ e paper setting screen is not displayed if you have disabled Paper Conguration in the following menus. In this
situation, you cannot print from an iPhone or iPad using AirPrint.
Settings > Printer Settings > Paper Source Setting > Paper Conguration
10. Check the settings, and then select Done.
11. Slide out the output tray.
Related Information
& “Paper Handling Precautions” on page 57
& “Available Paper and Capacities” on page 58
& “Menu Options for Printer Settings” on page 181
User's Guide
Loading Paper
65
To Next Page
Loading...
