1. Insert a memory device into the SD card slot or the external interface USB port of the printer.
c
Important:
Do not remove the memory device until you have
nished
printing.
2. Select Various prints on the control panel.
To select an item, move the focus to the item using the
u
d
l
r
buttons, and then press the OK button.
3. Select Greeting Card > Select Photo and Print Template.
4. When a message telling you that loading photos is complete is displayed, press the OK button.
5. Select the photo you want to print on the select photo screen, and then select Print Settings.
6.
Make print settings such as the paper type or layout for printing a photo with handwritten notes, and then
press the
r
button.
7. Load A4-size plain paper in paper cassette 2 to print a template.
8. Select To C heck Printing.
9.
Press the
x
button to print a template.
10.
Check the printout, and then select Close.
11. Follow the instructions on the template to write and draw.
12. Store the output tray by hand. Load photo paper in paper cassette 1.
13.
Select Print Using the Template.
14. Check the screen, place the template on the scanner glass, and then press the OK button.
Note:
Make sure that the text on the template is completely dry before placing it on the scanner glass. If there are stains on the
scanner glass, the stains are also printed on the photo.
15. Press the button to edit the photos as necessary.
16. Slide out the output tray.
17. Enter the number of copies, and then press the
x
button.
Related Information
& “Inserting a Memory Card” on page 76
& “Guide to the Select Photo Screen (Single View)” on page 82
& “Menu Options for Paper and Print Settings” on page 88
& “Loading Paper in the Paper Cassette 1” on page 62
& “Loading Paper in the Paper Cassette 2” on page 66
&
“List of Paper Types” on page 60
User's Guide
Printing
92
To Next Page
Loading...
