10. Move the focus to the outer diameter, and then press the - or + button to adjust the value. Adjust the inner
diameter in the same manner.
You can also set the diameter by selecting the value in the frame and using the on-screen keypad.
Note:
❏ You can set 114 to 120 mm as the outer diameter, and 18 to 46 mm as the inner diameter in 1 mm increments.
❏ e inner diameter and the outer diameter you set are restored to their defaults aer printing the disc label. You can
change the defaults in Settings > Printer Settings > CD Inner/Outer.
11. Select Select Type.
12. Select Print on CD/DVD.
Note:
For test printing, select Test print on A4 paper, and then load A4 plain paper in paper cassette 2. You can check the
printout image before printing on a CD/DVD label.
13. When the message prompts you to load a CD/DVD, select How To, and load a CD/DVD by referring to the
instructions.
c
Important:
Place a CD/DVD on the CD/DVD tray with the printable side facing up. Press the center of the CD/DVD to
securely set it on the CD/DVD tray. Otherwise, the CD/DVD may fall o the tray. Turn over the tray to check
that the CD/DVD is rmly secured in the tray.
Note:
You may feel slight friction when inserting the tray into the printer. is is normal and you should continue to insert it
horizontally.
14. Select Installed.
15.
Press the
button to edit the photos as necessary.
16. Press the
x
button.
User's Guide
Printing
94
To Next Page
Loading...
