5. Attach the continuous paper to the tractor unit. See “Printing on Continuous Paper” on
page 15.
6. Turn off the printer, and then turn on the printer.
7. Determine which pages were not printed correctly and print them again.
When the user finds a paper jam before the printer detects an error:
1. Press the Pause button to stop printing.
2. Hold down the Tear Off and FF buttons for about three seconds. The jammed paper is released.
3. Tear off the printed part of the paper.
4. Open the sprocket covers of both sprockets.
5. Remove the paper. Pull the continuous paper forward or backward out of the printer.
Note:
Pull paper straight out to remove it from the printer.
6. Open the top cover and make sure there is no paper left.
7. Attach the continuous paper to the tractor unit. See “Printing on Continuous Paper” on
page 15.
8. Press the Job Cancel button to cancel printing.
9. Press the Pause button again to restart printing.
10. Determine which pages were not printed and print them again.
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide
Troubleshooting 63
To Next Page
Loading...
Need help?
General