Setting up the Scanner 17
R
R4CA100
Setup Guide Rev. D
SETUP.FM A5 size
12/9/03
Proof Sign-off:
KOW M. Tago K. Yoda
T. Takahashi
NOC K. Lee
Connecting the Scanner Using the USB
Interface
Your PC must have been purchased with Windows XP, 2000, Me,
or 98 preinstalled, and have a working USB port.
Note:
Be sure to install the scanner software before connecting the scanner to
your computer. See “Installing the Software” on page 6 for details.
Understanding USB connections
Note:
❏ Do not connect or disconnect USB cables when the scanner is in use.
❏ You can also use a USB hub, allowing you to increase the number
of USB ports and therefore connect several peripherals.
❏ If you connect your scanner through more than one hub, your
system may not work properly. In this case, try connecting the
scanner directly to the computer’s USB port. Also, your system may
not work properly if you use a USB cable other than that supplied
by EPSON.
To Next Page
Loading...
