Epson GT-12000 User Manual (English)

Questions and Answers:

M
millermelissaAug 20, 2025
What to do if Epson Scanner software does not work properly?
- C
  Christina CooperAug 20, 2025
  If the Epson Scanner software isn't functioning correctly, ensure that it has been correctly installed and that your computer meets the system requirements specified for the software, including the operating system version. Also, verify that your software supports your scanner model and that the software was correctly installed. Confirm that the computer has enough memory for the software. Running other software, RAM resident programs, or having many device drivers may reduce available memory.
J
jeffrey78Aug 22, 2025
What to do if Epson GT-12000 does not start scanning?
- C
  Christopher VelasquezAug 22, 2025
  If your Epson Scanner isn't starting, make sure you've selected the correct interface port and settings within your software. Also, verify the interface board on your computer is properly installed. If using a SCSI interface, confirm the terminator. If you have other expansion boards in your computer, ensure they are not interfering with the interrupt setting of the interface board for your scanner.
Y
yatesangelaAug 25, 2025
What to do if the edges of the document are missing from the scanned output of my Epson GT-12000 Scanner?
- T
  Tyler BrownAug 25, 2025
  If the edges of your document are missing from the scanned output of your Epson Scanner, and part of your document extends beyond the maximum limits marked on the document table edge guides, reposition your document so that the image you want to scan is within the readable area.
J
Janet AbbottAug 26, 2025
What to do if the READY light does not come on Epson GT-12000 Scanner?
- D
  Dale RamirezAug 27, 2025
  If the READY light does not come on your Epson Scanner, make sure the scanner is correctly connected to the computer and that the computer is turned on.
J
Jon ReedAug 27, 2025
What to do if the OPERATE light does not come on Epson GT-12000 Scanner?
- S
  Shane MasonAug 27, 2025
  If the OPERATE light does not come on your Epson Scanner, make sure the power cable is correctly plugged into the scanner and the power outlet.
J
jessicawebbAug 29, 2025
Why does the scanned image from my Epson GT-12000 not look like the original?
- D
  Danielle GomezAug 29, 2025
  The scanned image from your Epson Scanner may not look like the original due to a combination of factors. First, experiment with different image settings within your scanner software. It's also possible that your software lacks sufficient color matching and color management features, or these components aren't correctly installed. If importing the scanned image, ensure the file format is compatible with your application software and that the image settings are appropriate for the image type.
J
James LarsonAug 31, 2025
How to fix too dark image from Epson GT-12000 Scanner?
- T
  timothymontgomeryAug 31, 2025
  If the image from your Epson Scanner is too dark, adjust the brightness using your software. Also, check the brightness and contrast values of your display screen.
A
arnoldericSep 2, 2025
Why is the entire image from my Epson Scanner distorted or blurred?
- M
  Matthew HuntSep 2, 2025
  If the entire image from your Epson Scanner appears distorted or blurred, ensure that the document is placed flat against the document table. It's possible the document moved during scanning, so check its position and avoid movement during operation. Also, make sure the scanner is not tilted or placed on an unstable surface.
K
Kenneth HartSep 4, 2025
How to fix faint or out of focus image from Epson GT-12000 Scanner?
- L
  laurasmithSep 4, 2025
  To correct a faint or out-of-focus image from your Epson Scanner, first, check that the document is placed flush against the document table. Additionally, make the brightness setting in your software darker.
D
Deborah CoffeySep 6, 2025
Why is part of the image from my Epson Scanner distorted or blurred?
- W
  William KellySep 6, 2025
  If part of the image from your Epson Scanner is distorted or blurred, it may be due to a wrinkle, warp, or lack of contact between part of the document and the document table. Ensure the document is uniformly flat.