Replacing the fluorescent lamps
The luminosity of the fluorescent lamps declines over time. If
the lamps break or become too dim to operate normally, the
scanner stops working and both the READY and ERROR lights
flash. When this happens, the lamp assembly must be replaced.
For details, contact your dealer.
c
Caution:
Never open the case of the scanner. If you think repairs or
adjustments are necessary, consult your dealer.
Transporting the Scanner
If you need to transport the scanner a long distance or store it
for an extended period, follow the steps below to secure the
carriage.
1. Turn on the scanner and wait until the carriage moves to
the home position (the left of the scanner when facing the
underside of the cover). Then turn off the scanner.
2. Secure the transportation lock screw to the locked position to
secure the carriage.
L
Ginger Rev.C
A5 size Chapter 4
97/07/24 Pass 0, DR
4-10
Troubleshooting and Maintenance
To Next Page
Loading...
