Installing the Auto Document Feeder
Before installing the Auto Document Feeder, be aware that:
❑
The Auto Document Feeder is heavy, so you may need to
have someone help you lift it.
❑
The Auto Document Feeder is large, so you should clear
the space around the scanner.
Follow the steps below to install the Auto Document Feeder on
your EPSON scanner.
1. Make sure your scanner is turned off, and unplug the
scanner’s power cable.
2. Remove your scanner’s document cover by holding the
cover behind the hinge and lifting the back of the cover
straight up.
04-09
R
Ginger Rev.C
A5 size Chapter 3
97/07/23 Pass 3, DR
Options
3-17
To Next Page
Loading...
