SCSI Peripheral Cable (50-pin to 50-pin) (B860091)
This cable provides connection between two SCSI devices in a
daisy chain.
Interface Cables
For the parallel interface, you need to have a suitable interface
cable to connect the scanner to your computer. Make sure you
choose a shielded cable.
How to Use This Guide
❑
See Chapter 1, “Setting Up the Scanner,” for information
about setting up your scanner and connecting it to your
computer. Be sure to read this first.
❑
See Chapter 2, “Scanning Basics,” for information on the
operation of your scanner.
❑
See Chapter 3, “Options,” for information about installing
and using options.
❑
See Chapter 4, “Troubleshooting and Maintenance,” for
information on solving scanner problems, maintaining
your scanner, and transporting your scanner. There is also
a section on how to improve your scanned output by
upgrading your equipment in this chapter.
❑
See Appendix A for various specification information.
❑
See Appendix B for customer support information.
For information on scanning, see the software manual that
came with the scanner. Additionally, see your application
documentation if necessary.
R
Ginger Rev.C
A5 size Intro
97/07/23 Pass 1, DR
Introduction
3
To Next Page
Loading...
Need help?
General