Options 25
R
R4CA100
Setup Guide Rev. D
SETUP.FM A5 size
12/9/03
Proof Sign-off:
KOW M. Tago K. Yoda
T. Takahashi
NOC K. Lee
Installing the Automatic Document Feeder
Before installing the Automatic Document Feeder, be aware that:
❏ The Automatic Document Feeder is heavy, so you may need
to have someone help you lift it.
❏ The Automatic Document Feeder is large, so you should clear
sufficient space around the scanner.
Follow the steps below to install the Automatic Document Feeder
on your EPSON scanner:
1. Make sure your scanner is turned off and unplug the power
cord.
2. Open the scanner's document cover, then remove it by lifting
the back of the cover straight up.
Warning:
Before removing the document cover, make sure to raise it to the
upright position to prevent the hinges from snapping back on the
springs.
To Next Page
Loading...
