Epson H931A - Page 54

To Next Page

To Previous Page

Useful Functions

Connection example 4: Viewing with a connected smart device

Connect an MHL cable to the HDMI4 port.

Main Page

Organization of the Guide and Notations in the Guide2
Using each Guide2
Notations Used in this Guide3
- Safety Indications3
- General Information Indications3
- About the Use of "This Product" or "This Projector3
- Table of Contents4
Introduction7
Part Names and Functions7
- Front/Top7
- Control Panel8
- Remote Control10
- Rear13
- Base14
Preparing15
Installing15
- Projected Image and Position of Projector15
  - Installing in Parallel with the Screen15
  - Installing the Projector Horizontally by Adjusting the Height of Either Side15
- Various Setting Methods16
  - Placing on a Table and Projecting16
  - Suspending from the Ceiling and Projecting17
- Projection Distance and Lens Shift Maximum Values17
Connecting a Device20
- Removing the Terminal Cover20
- Connecting Video Equipment20
- Connecting a Computer21
- Connecting External Equipment21
- Attaching the Wireless LAN Unit22
- Connecting an HDMI Cable Clamp23
Preparing the Remote Control24
- Installing the Remote Control Batteries24
- Remote Control Operating Range25
  - Operating Range (Left to Right)25
  - Operating Range (Top to Bottom)25
Basic Operations26
Projecting Images26
- Turning on the Projector26
  - If the Target Image Is Not Projected27
- Using the Home Screen27
- Turning off28
Adjusting the Projected Image29
- Displaying the Test Pattern29
- Lens Adjustment Function (Focus, Zoom, Lens Shift)29
- Adjusting the Projector's Tilt32
- Correcting Keystone Distortion32
- Hiding the Image Temporarily32
Adjusting the Image33
- Selecting the Projection Quality (Color Mode)33
- Switching the Screen between Full and Zoom (Aspect)34
- Adjusting the Sharpness35
- Adjusting Image Resolution (Image Enhancement)36
- Setting Auto Iris37
- Setting Frame Interpolation37
Adjusting the Color39
- Adjusting the Color Temp39
- Adjusting the RGB (Offset and Gain)39
- Adjusting Hue, Saturation, and Brightness39
- Adjusting the Gamma41
  - Select and Adjust the Correction Value41
Quality (Memory Function)43
Viewing the Image at the Saved Image43
- Saving a Memory43
Enjoying 3D Images45
Useful Functions45
- Preparing to View 3D Images45
- Using 3D Glasses46
Connecting with Wirelesshd48
- Installing the Wirelesshd Transmitter48
  - Wirelesshd Transmitter Part Names49
  - Wirelesshd Transmitter Connection Example and Signal Flow50
Using the HDMI Link Function55
- HDMI Link Function55

Epson H931A - Page 54

Table of Contents

Related product manuals