58
You see a screen like this:
Note: The active linked device source is indicated in blue.
7. Select the device you want to control and project images from and press Enter.
8. Select the following HDMI link options as necessary:
• Audio Out Device: selects which device outputs audio. Select Projector to output audio from the
projector’s built-in speakers or from an external speaker connected to the Audio Out port. Select
AV System to output audio from an AV amplifier that supports the HDMI CEC standards.
• Power On Link: select what happens when you turn on the projector or linked device. Select PJ -
> Device or Bidirectional to turn the linked device on when the projector is turned on, or Device -
> PJ or Bidirectional to turn the projector on when the linked device is turned on.
• Power Off Link: select whether linked devices are turned off when the projector is turned off.
9. When you are finished, press Esc.
Parent topic: Adjusting Projector Features
Shutting Off the Picture and Sound Temporarily
You can temporarily turn off the projector's picture and sound. Any sound or video action continues to
run, however, so you cannot resume projection at the point that you stopped it.
To Next Page
Loading...
Need help?
General