Epson Home Cinema 2350 User Manual

46
2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector.
The foot extends from the projector.
3. Release the lever to lock the foot.
4. If the image is tilted, rotate the rear feet to adjust their height.
If the projected image is unevenly rectangular, you need to adjust the image shape.
Parent topic: Using Basic Projector Features
Related concepts
Image Shape
Adjusting the Image Position Using Lens Shift
If you cannot install the projector directly in front of the screen, you can adjust the position of the
projected image using the vertical lens shift feature.

Epson Home Cinema 2350 Specifications

General

Contrast Ratio	35, 000:1
Projection Technology	3LCD
Lens Shift	Vertical: ±60%, Horizontal: ±24%
Input Lag	20 ms
Resolution	1920 x 1080
Connectivity	HDMI, USB, Audio Out
Wireless	Yes
HDR Support	HDR10
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Built-in Speakers	Yes, 10W
Brightness	2800 Lumens (White), 2800 Lumens (Color)