Epson L220 - Product Light Status

Product Light Status
You can often diagnose problems with your product by checking its lights.
Lights
1
power
2
paper
3
ink
Light status Condition/solution
The product is turned on.
The power light is on
The power light is flashing The product is busy. Wait for the power light to stop flashing before
turning off the product.
Paper is jammed in the product. Remove the jammed paper, and press
The paper light is flashing
the B&W copy button or the color copy button to clear the error.
No paper is loaded or multiple sheets fed at one time. Load paper in the
The paper light is on
product, and press the B&W copy button or the color copy
button to clear the error.
Initial ink charging may not be complete. See the Start Here poster for
The power light is on
instructions.
The ink light is on
138