4.
Slide the edge guides to the edges of the envelopes.
Close the feeder guard aer sliding the edge guides.
c
Important:
Do not place objects on the feeder guard. Doing so may prevent paper from feeding.
5.
Slide out the output tray.
Loading Various Paper
Loading Pre-punched Paper
Load paper at the center arrow mark of the paper support with the printable side facing up.
Load a single sheet of dened size plain paper with binding holes at the le or right. Adjust the print position of
your le to avoid printing over the holes.
Loading Paper
>
Loading Various Paper
>
Loading Pre-punched Paper
25
To Next Page
Loading...
