EasyManuals Logo

Epson L3251 User Manual

Epson L3251
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
169
Try restarting your router following the instructions in your router documentation.
Note: If you are reading these instructions online, you will lose your Internet connection when you
restart your router.
Check to see if your wireless router or access point has an enabled Privacy Separator function that is
preventing printing from a device over the network. See your router or access point documentation for
instructions on disabling the Privacy Separator function.
If you are connecting the product via Wi-Fi Protected Setup (WPS) and the Wi-Fi light on your
product is not solid green, make sure you press the Wi-Fi button on the product within 2 minutes of
pressing the WPS button on your router. Hold down the Wi-Fi button on the product for 3 seconds.
If you are printing a large data size image, the computer may run out of memory. Print the image at a
lower resolution or a smaller size.
Parent topic: Solving Network Problems
Related concepts
Uninstall Your Product Software
Related tasks
Enabling Wi-Fi Direct Mode
Using WPS to Connect to a Network
Printing a Network Status Sheet
Cannot Scan Over a Network
If you have problems scanning over a network, try these solutions:
Make sure you are scanning from a computer. If you want to scan from your product control panel, you
must connect the product to your computer with a USB cable.
Check the scanning setting assigned in Epson Event Manager.
If you are scanning a large original at a high resolution, a network communication error may occur. Try
scanning again at a lower resolution.
If network communication was interrupted while starting Epson Scan 2, exit Epson Scan 2, wait a few
seconds, and restart it. If Epson Scan 2 cannot restart, turn off your product, turn it back on, and try
restarting Epson Scan 2 again.
Check the scanner setting and reset the connection if necessary using Epson Scan 2 Utility:
Windows 10: Click and select EPSON > Epson Scan 2 Utility. Make sure your product is
selected. If necessary, select the Other tab and click Reset.

Table of Contents

Other manuals for Epson L3251

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson L3251 and is the answer not in the manual?

Epson L3251 Specifications

General IconGeneral
Maximum Print Resolution5760 x 1440 dpi
Maximum Scan Resolution1200 x 2400 dpi
Minimum Ink Droplet Size3 pl
Duplex PrintingManual
Dimensions375 x 347 x 179 mm
Weight3.9 kg
Print TechnologyOn-demand inkjet (Piezo electric)
ConnectivityUSB, Wi-Fi, Wi-Fi Direct
Scanner TypeFlatbed color image scanner
Printing Speed ISO/IEC 2473410 ipm black, 5 ipm color
Paper FormatsA4, A5, A6, B5, C6, DL
Energy UseApprox. 12W
Ink Tank Capacity (Color)70 ml (each color)

Related product manuals