Handling precautions
❏ Use ink bottles with the correct part code for this printer.
❏ is printer requires careful handling of ink. Ink may splatter when the ink tanks are lled or relled with ink.
If ink gets on your clothes or belongings, it may not come o.
❏ Store ink bottles at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink bottle before the date printed on the package.
❏ Store the ink bottles in the same environment as the printer.
❏ When storing or transporting an ink bottle
aer
removing its seal, do not tilt the bottle and do not subject it to
impacts or temperature changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely.
Be sure to keep the ink bottle upright when tightening the cap, and take measures to prevent ink from leaking
when you transport the bottle.
❏ Aer bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Do not open the ink bottle package until you are ready to
ll
the ink tank.
e
ink bottle is vacuum packed to
maintain its reliability. If you leave an ink bottle unpacked for a long time before using it, normal printing may
not be possible.
❏ If any of the ink tanks are not
lled
up to the lower line,
rell
the ink soon. Continued use of the printer when
the ink level is below the lower line on the tanks could damage the printer.
❏ Although the ink bottles may contain recycled materials, this does not aect printer function or performance.
❏
Specications
and appearance of the ink bottle are subject to change without prior notice for improvement.
❏ Quoted yields may vary depending on the images that you are printing, the paper type that you are using, the
frequency of your prints and environmental conditions such as temperature.
Ink consumption
❏ To maintain optimum print head performance, some ink is consumed from all ink tanks not only during
printing but also during maintenance operation such as print head cleaning.
❏ When printing in monochrome or grayscale, color inks instead of black ink may be used depending on the
paper type or print quality settings. is is because a mixture of color inks is used to create black.
❏
e
ink in the ink bottles supplied with your printer is partly used during initial setup. In order to produce high
quality printouts, the print head in your printer will be fully charged with ink. is one-o process consumes a
quantity of ink and therefore these bottles may print fewer pages compared to subsequent ink bottles.
Relling the Ink Tanks
Ink can be relled at any time.
1.
Unhook the ink tank unit from the printer and lay it down.
User's Guide
Relling Ink
46
To Next Page
Loading...
Need help?
General
