Epson Labelworks LW-Z700 - Initializing the Settings

17
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Initializing the Settings
Initialize the settings if the printer does not operate normally
such as the display is interrupted.
Attention
This function initializes the settings. Take extreme care before
initializing it. All the created text will be lost and the settings
you made will be reset.
1. If the power is on, press to turn it o.
2. Press and hold
+ , and press .
3. When a message appears, press
.
The settings will be initialized.
MEMO
To cancel initialization, press a key other than .