What to do if Epson LQ-2090IIN Printer printout has extra blank lines between lines of text?
If your Epson printer's output has extra blank lines, it's likely because two line feed commands are being sent. This happens when the printer’s auto line feed setting is on. Turn off the auto line feed setting using the printer’s Default Setting mode.
Why is my Epson Printer printing strange symbols?
If your Epson printer prints strange symbols, incorrect fonts, or other inappropriate characters, it means that your printer and computer are not communicating correctly. Make sure that you use the correct interface cable and that the communications protocol is correct.
What to do if Epson LQ-2090IIN Printer has lines of dots missing in the printout?
If you notice lines of dots missing in your Epson printer's output, it indicates that the print head is damaged. Stop printing and contact your dealer to have the print head replaced.
Why is part of the printout missing from my Epson LQ-2090IIN Printer?
If part of the printout is missing, or dots are missing in random positions on your Epson printer, the ribbon may have too much slack, the ribbon has come loose, or the ribbon cartridge is not installed properly. Remove any slack in the ribbon by turning the ribbon-tightening knob, or reinstall the ribbon cartridge.
Why does my Epson LQ-2090IIN make noise but not print?
If your Epson printer makes noise, but nothing prints or printing stops abruptly, it could be due to the paper-thickness lever being set incorrectly. Adjust it to match the thickness of your paper. Alternatively, the ribbon might have too much slack, come loose, or the ribbon cartridge might not be installed properly. Remove any slack in the ribbon by turning the ribbon-tightening knob, or reinstall the ribbon cartridge.
What to do if paper release lever is set to the wrong position in Epson Printer?
If the paper release lever is set to the wrong position on your Epson printer, set the paper release lever to the position for the paper source you want to use. If paper from another paper source is currently in the paper path, press the Load/Eject button to eject the paper; then move the paper release lever to the desired position.
What to do if Epson LQ-2090IIN Printer does not work and the control panel lights are off?
If your Epson Printer doesn't work and the control panel lights are off, here's what to check: * First, ensure the printer is turned on. * Next, verify the power cord is properly plugged into both the electrical outlet and the printer itself. If it wasn't, turn off the printer, firmly plug in the cord, and then turn the printer back on. * Finally, try a different electrical outlet to rule out a faulty outlet.
What to do if Epson LQ-2090IIN is not connected directly to your computer?
Make sure that the Epson printer works correctly when it is connected to your computer without these devices.
Why Epson LQ-2090IIN Printer does not print when using a network?
If your Epson printer doesn't print when using a network, the network setting might be wrong. Check if print jobs from other computers are being printed through the network. If not, network settings may be incorrect. Ask your network administrator for help.
What to do if Epson Printer printout is faint?
If your Epson printer's printout is faint, it might be because the paper-thickness lever is set incorrectly for your paper. Move the paper-thickness lever to a lower setting. Also, the ribbon could be worn out; in this case, replace the ribbon cartridge.
General| Printing Method | Impact Dot Matrix |
|---|---|
| Number of Pins | 24 pins |
| Print Direction | Bi-directional with logic seeking |
| Memory | 128 KB |
| Emulations | ESC/P2, IBM PPDS |
| Noise Level | 55 dB (A) |
| Type | Dot Matrix Printer |
| Paper Path | Manual Insertion, Push Tractor, Pull Tractor |
| Paper Media | Continuous Paper, Labels, Envelopes |
| Interface | USB 2.0, Parallel |
| Paper Width | 101.6 mm - 406.4 mm |
Explains the meaning and importance of warnings, cautions, and notes.
General safety guidelines for using the printer.
Safety precautions to follow during printer setup.
Safety precautions related to printer maintenance.
Safety guidelines to follow while operating the printer.
Detailed instructions for printing with continuous paper.
Instructions on accessing and using the printer driver.
How to check and change printer driver configurations.
Comprehensive guide for configuring the printer for network use.
Instructions on how to share the printer on a network.
Steps to configure the printer as a server on a network.
Description and function of the printer's control panel buttons and lights.
How to access and change the printer's default settings.
Diagnosing printer problems using control panel lights and beep patterns.
Common printer issues and their corresponding troubleshooting steps.
Troubleshooting issues related to power and its connection.
Resolving issues affecting the quality of printed output.
Troubleshooting issues related to paper feeding and loading.
Step-by-step guide to safely remove jammed paper from the printer.
Step-by-step instructions for installing or replacing the ribbon cartridge.
To Next Page
