Why Epson LQ-2090IIN Printer does not print when using a network?
If your Epson printer doesn't print when using a network, the network setting might be wrong. Check if print jobs from other computers are being printed through the network. If not, network settings may be incorrect. Ask your network administrator for help.
What to do if Epson LQ-2090IIN is not connected directly to your computer?
Make sure that the Epson printer works correctly when it is connected to your computer without these devices.
What to do if Epson LQ-2090IIN Printer does not work and the control panel lights are off?
If your Epson Printer doesn't work and the control panel lights are off, here's what to check: * First, ensure the printer is turned on. * Next, verify the power cord is properly plugged into both the electrical outlet and the printer itself. If it wasn't, turn off the printer, firmly plug in the cord, and then turn the printer back on. * Finally, try a different electrical outlet to rule out a faulty outlet.
What to do if Epson Printer prints strange symbols, incorrect fonts, or other inappropriate characters?
If your Epson printer is printing strange symbols or incorrect characters, it indicates a communication issue. Ensure you're using the correct interface cable and that the communications protocol is correct. Also, verify that the correct character table is selected in your software. Finally, confirm that the correct printer is selected in your software before printing.
What to do if Epson LQ-2090IIN makes noise, but nothing prints?
If your Epson printer makes noise but doesn't print, or if printing stops abruptly, check the following: Ensure the paper-thickness lever is correctly set to match the thickness of your paper. Also, check the ribbon. Remove any slack by turning the ribbon-tightening knob, or reinstall the ribbon cartridge.
What to do if part of Epson LQ-2090IIN printout is missing?
If parts of your Epson printer's printout are missing, or there are missing dots, the ribbon may have too much slack, be loose, or the cartridge might not be installed properly. Remove any slack in the ribbon by turning the ribbon-tightening knob, or reinstall the ribbon cartridge. Also, the ribbon might be worn out, so consider replacing it.
What to do if my Epson Printer does not print when the computer sends data?
If your Epson printer isn't printing when the computer sends data, try these solutions: * Make sure the printer is not paused by pressing the Pause button to turn off the Pause light. * Check that both ends of the interface cable between the printer and the computer are securely plugged in. * Ensure that you are using an interface cable that meets the requirements of both the printer and computer. * Verify that your software is properly set up for your printer by selecting your printer from the Windows desktop or in your application. If necessary, install or reinstall the printer driver software.
What to do if Epson LQ-2090IIN prints all the text on the same line?
If your Epson printer prints all text on one line, it means no line feed command is being sent. Turn on the auto line feed setting using the printer’s Default Setting mode so that the printer automatically adds a line feed code to each carriage return.
What to do if Epson LQ-2090IIN Printer printout has extra blank lines between lines of text?
If your Epson printer's output has extra blank lines, it's likely because two line feed commands are being sent. This happens when the printer’s auto line feed setting is on. Turn off the auto line feed setting using the printer’s Default Setting mode.
What to do if Epson LQ-2090IIN Printer printing appears too high or low on the page?
If your Epson printer's printing appears too high or low on the page, the paper size setting in your application software or printer driver may not match the size of the paper you are using. Check the paper size setting in your application or printer driver.
General| Printing Method | Impact Dot Matrix |
|---|---|
| Number of Pins | 24 pins |
| Print Direction | Bi-directional with logic seeking |
| Memory | 128 KB |
| Emulations | ESC/P2, IBM PPDS |
| Noise Level | 55 dB (A) |
| Type | Dot Matrix Printer |
| Paper Path | Manual Insertion, Push Tractor, Pull Tractor |
| Paper Media | Continuous Paper, Labels, Envelopes |
| Interface | USB 2.0, Parallel |
| Paper Width | 101.6 mm - 406.4 mm |
Explains the meaning and importance of warnings, cautions, and notes.
General safety guidelines for using the printer.
Safety precautions to follow during printer setup.
Safety precautions related to printer maintenance.
Safety guidelines to follow while operating the printer.
Detailed instructions for printing with continuous paper.
Instructions on accessing and using the printer driver.
How to check and change printer driver configurations.
Comprehensive guide for configuring the printer for network use.
Instructions on how to share the printer on a network.
Steps to configure the printer as a server on a network.
Description and function of the printer's control panel buttons and lights.
How to access and change the printer's default settings.
Diagnosing printer problems using control panel lights and beep patterns.
Common printer issues and their corresponding troubleshooting steps.
Troubleshooting issues related to power and its connection.
Resolving issues affecting the quality of printed output.
Troubleshooting issues related to paper feeding and loading.
Step-by-step guide to safely remove jammed paper from the printer.
Step-by-step instructions for installing or replacing the ribbon cartridge.
To Next Page
