109
Setting Options Description
Operation Direct Power On
Sleep Mode
Sleep Mode Timer
Illumination
High Altitude Mode
Quick Startup
USB Power in Standby
Log Save Destination
Selects various operation options
Direct Power On: turns on the
projector when you plug it in
Sleep Mode: select On to place
the projector in standby mode
after a certain interval of inactivity
Sleep Mode Timer: sets the
sleep mode internal between 1
and 30 minutes
Illumination: turns off the
indicators on the projector
High Altitude Mode: regulates
the projector’s operating
temperature at altitudes above
4921 feet (1500 m)
Quick Startup: the projector
enters this mode when you turn it
off; you can start projecting in
about five seconds by pressing
the Power button
USB Power in Standby: Sends
power to the connected device
even if the projector is in standby
mode (when the power is off). If
the internal temperature of the
projector gets too high, the power
supply may stop automatically.
This feature is not available in all
countries.
Log Save Destination: sets
where you want to save the
internal projector information logs
To Next Page
Loading...
Need help?
General