65
You see the Quick Corner adjustment screen:
Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a
reset screen. Then select Yes.
6. Use the arrow buttons on the projector or remote control to select the corner of the image you want
to adjust. Then press Enter.
7. Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the area
selection screen.
8. When you are finished, press Esc.
Parent topic: Image Shape
Related references
Projector Feature Settings - Settings Menu
Correcting Image Shape with the Keystone Buttons
You can use the projector's keystone correction buttons to correct the shape of an image that is
unevenly rectangular on the sides.
Note: You can use the keystone buttons to correct the image up to ± 3° horizontally or vertically.
Note: To provide the best possible image quality, adjust the projector's position to correct the image
shape. Due to the ultra-short throw characteristics of the projector, the projected image is greatly
To Next Page
Loading...
Need help?
General