EasyManuals Logo

Epson LS500W User Manual

Epson LS500W
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
86
3. Select the Image Enhancement setting and press Enter.
4. Select the Image Preset Mode setting and press Enter.
5. Select one of the presets and press Enter.
Note: If you select a previously used preset, your new adjustments overwrite the old ones.
6. Press Esc to return to the Image Enhancement menu.
7. Fine-tune the following settings:
Frame Interpolation
Deinterlacing (depends on the signal)
Noise Reduction
MPEG Noise Reduction
Super-resolution
Detail Enhancement
Note: You can select Image Preset Mode and toggle between Off and the preset you were
adjusting to quickly check the effects of the settings. The effect of a preset can vary depending on
the input signal type.
8. Press Menu or Esc to exit the menus.
The currently selected Image Preset Mode will be updated with the current settings.
Parent topic: Using Advanced Image Adjustment Features
Related references
Image Quality Settings - Image Menu

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson LS500W and is the answer not in the manual?

Epson LS500W Specifications

General IconGeneral
BrandEpson
ModelLS500W
CategoryProjector
LanguageEnglish

Related product manuals