Epson M100 Service Manual

Confidential
Adjustment Required Adjustments 62
M200 / M205 / M100 / M105 Series Revision A
Part Name
LD Roller Assy
Remove
--- --- ---
Replace
--- --- ---
CR Motor
Remove
--- --- ---
Replace
--- --- ---
PE Sensor Lever
Remove
--- --- ---
Replace
--- --- ---
Main Board
Remove
--- --- ---
Replace (Read OK)
--- --- ---
Replace (Read NG)
--- --- ---
CR Driven Pulley
Remove
--- --- ---
Replace
--- O ---
Main Frame Assy
Remove
--- --- ---
Replace
OO---
Paper Guide Upper Assy
Remove
--- --- ---
Replace
--- --- ---
CR Unit
Remove
--- --- ---
Replace
O --- ---
CR Timing Belt
Remove
--- --- ---
Replace
--- O ---
Frame Base Assy Replace
--- --- O
PF Roller Unit
Remove
--- --- O
Replace
--- --- O
PF Motor Assy
Remove
--- --- O
Replace
--- --- O
Frame Base Replace
--- --- O
Table 3-1. Required Adjustment List
Adjustment Type Mechanism adjustment
Priority
1 2 3
Adjustment Item
Checking the Platen
Gap
CR Belt tension check PF Belt tension check
Purpose
Check if the PG is within
the standard.
Check the tension of the
CR Timing Belt
Check the tension of the
PF Timing Belt
Printout pattern
--- --- ---
How to judge
See " 3.3.1 Checking the
Platen Gap (p69)" for
the details.
See " 3.3.2 CR/PF Belt
Tension Check (p71)"
for the details.
See " 3.3.2 CR/PF Belt
Tension Check (p71)"
for the details.
Adjustment program
--- --- ---
Tool See p69 See p71 See p71
Note "*1":Necessary when the part is replaced at a point in the disassembly procedures other than specified in this manual.

Epson M100 Specifications

General

Maximum Print Resolution	1440 x 720 dpi
Connectivity	USB 2.0
Output Tray Capacity	30 sheets
Ink Bottle Capacity	140ml
Weight	3.4 kg
Print Method	On-demand inkjet
Print Speed (Black)	34 ppm
Print Speed (ISO/IEC 24734)	15 ipm
Paper Formats	A4, A5, A6, B5, Letter, Legal
Paper Tray Capacity	100 sheets
Operating Systems	Mac OS 10.5.8 or later, Windows 7, Windows 8, Windows Vista, Windows XP, Windows XP x64
Dimensions	435‎ x 267 x 148 mm (Width x Depth x Height)