Adjusting Print Quality
If your print quality declines, you may need to run a utility to clean or align the print head.
If running these utilities does not solve the problem, you may need to flush the ink tube.
Print Head Maintenance
Print Head Alignment
Cleaning the Paper Path
Checking the Number of Sheets
Print Head Maintenance
If your printouts become too light, or you see dark or light bands across them, you may need to clean the
print head nozzles. Cleaning uses ink, so clean the nozzles only if print quality declines.
You can check for clogged nozzles before you clean them so you don’t clean them unnecessarily.
Note: You cannot clean the print head if the ink level has reached the lower line on the ink tank, and may
not be able to clean it when the ink level in the tank is low. You must refill the ink tank first.
Print Head Nozzle Check
Print Head Cleaning
Ink Tube Flushing
Parent topic: Adjusting Print Quality
Print Head Nozzle Check
You can print a nozzle check pattern to check for clogged nozzles.
Checking the Nozzles Using the Product Control Panel
Checking the Nozzles Using a Computer Utility
Parent topic: Print Head Maintenance
Checking the Nozzles Using the Product Control Panel
You can check the print head nozzles using the control panel on your product.
1. Load a few sheets of plain paper in the product.
2. Press the Ajustes button.
121
To Next Page
Loading...
Need help?
General
