The ADF light on the control panel turns on.
Note: If the ADF light does not turn on when you place originals in the ADF, the product may be in
sleep mode. Press any button (except the Iniciar button) to wake up your product. After some
time, the ADF light will turn on. If the ADF light still does not turn on, there may be originals on the
scanner glass. Lift the scanner lid and remove the original.
4. Slide the ADF edge guide against the originals, but not too tightly.
Parent topic: Placing Originals on the Product
Related references
Automatic Document Feeder (ADF) Specifications
Related topics
Copying
Scanning
36
To Next Page
Loading...
