46
Creating the Slide Show
You can create a slide show from images in a folder or
album in the P-2000 or on a memory card. The easiest
way to select files for your slide show is to copy them to
an album. See page 39 for instructions.
Then follow these steps to create a slide show and select
transitions and music:
1 Highlight or open the album or folder you want to
use for the slide show.
2 Press the Menu button. You see the pop-up menu.
3 Select Start Slide Show and press OK. The slide
show begins.
4 Press the Menu button. You see the slide show pop-
up menu.
5 Select Slide Show Effect and press right on the
4-way ring. Choose from one of the 5 transition
effects and press the
OK button.
6 Repeat step 4 and select Slide Show Duration.
Press right on the 4-way ring and select the timing
for each image:
3, 5, 10, or 30 seconds, or 1, 5, or 30
minutes. Then press
OK.
To Next Page
Loading...
