2 - Mobilink P80 & Mobilink P80 Plus
What’s in the Box
❏ Mobilink P80 or Mobilink P80 Plus printer
❏ User’s manual and setup guide
❏ Small thermal paper roll (for operational testing)
❏ Battery, model OT-BY80 (with user’s manual)
❏ USB cable saddle
❏ Belt clip (attached to printer)
❏ Paper guides (Mobilink P80 Plus only)
Note: The illustrations show the Mobilink P80 and apply to both the
Mobilink P80 and Mobilink P80 Plus printers unless otherwise noted.
Accessories
Printer Specifications
Printing
Print method: thermal line printing
Dot density: 203 dpi × 203 dpi
(dpi = dots per inch [25.4 mm])
Print width: 2.84" (72.1 mm), 576 dots (48 columns)
2.69" (68.3 mm), 546 dots (42 columns)
Characters per line: font A: 48, font B: 64 (48 columns)
font A: 42, font B: 60 (42 columns)
Print direction: unidirectional with friction feed
Print speed: 3.94"/sec. (100 mm/sec.) maximum
Paper feed speed: approx. 3.94"/sec. (100 mm/sec.)
(continuous paper feed)
Character sets: alphanumeric: 95 characters;
international: 18 sets
extended graphics: 128 × 43 pages
(including a user-defined page)
Interfaces
Built-in: USB 2.0 Full-speed
Wireless: Bluetooth
®
or IEEE 802.11b/g/n (2.4
Ghz), 802.11a/n (5 Ghz), depending
on model.
Media
Paper type: thermal roll paper
Paper size: 80 mm (3.15")
76 mm (3.00") (Mobilink P80 Plus only)
Max. diameter: 51.0 mm (2.01") outside maximum
18.0 mm (0.71") outer core minimum
Specified paper:
Option Model Part number
AC/DC power supply PS-11 C32C825375
Battery OT-BY60II C32C831091
Multi-battery charger OT-CH60II C32C825374
Paper type number Manufacturer
TF50KS-EY NIPPON Paper Industries Co., Ltd.
PD150R, PD160R,
PD190R
Oji Holdings Corporation
P30023, P31023,
P35024
Kanzaki Specialty Papers
KT55F20, KT48F20 Koelher Paper Group
AF50KS-E Jujo Thermal Ltd.
F5041(48), F5041(55) Mitsubishi HiTec Paper
To Next Page
Loading...
