Epson Perfection V200 Photo - Placing Film or Slides; Removing the Document Mat; Placing Film in the Holder

Epson Perfection V200 Photo
4 - Epson Perfection V200 Photo 6/07
3. Lay the cover down flat behind the scanner.
Note:
When scanning with the scanner cover open, gently press down
on your document to flatten it.
4. When you are finished scanning, replace the scanner cover.
Placing Film or Slides
Removing the Document Mat
To scan film strips or slides, you need to remove the document
mat from the scanner cover. This uncovers the transparency
unit window so your scanner can use it to scan your film or
slides.
1. Open the scanner cover and gently slide up the document
mat to remove it.
2. Use a soft microfiber cloth to wipe the transparency unit
window and the document table before placing your film or
slides.
To place film for scanning, see the next section.
To place slides for scanning, see page 5.
Placing Film in the Holder
1. Open the cover of the 35mm film strip holder.
a
Transparency
unit window