If you are viewing the normal preview, you can do the following to adjust the image(s).
To select your scan area, click the
auto locate icon to create a marquee that marks the edges of your image area. You can
move the marquee to change the scan area. See Creating a Marquee on a Preview Image for instructions.
Note:
If you are going to scan at a different size than your original, you must first select your Target Size and
automatically create a marquee that is proportioned to that size. You can then copy the marquee and place it on
each image you will scan at that size.
To enlarge or reduce the preview image in the Normal preview, resize the Preview window. The image size changes
corresponding to the Preview window size.
To zoom in on an image in the Normal preview, click inside the scan area and click the Zoom button.
Note:
Zoom button changes into Full button on Zoom display.
Full button changes into Zoom button on Full display.
To adjust the image quality, click the scan area(s) you want to modify and make the adjustments. See Adjusting the Color and
Other Image Settings for instructions.
If you are viewing the thumbnail preview, you can do the following to adjust the image(s):
To zoom in on an image in the Thumbnail preview, double-click the thumbnail to zoom in.
You can change the size of thumbnail by using either the
Thumbnail <Large>, Thumbnail <Small>, or Full size of
1 frame buttons.
To rotate an image or flip it horizontally (like a mirror image), click its thumbnail and then click the
rotation icon or
mirroring icon.
To adjust the scan area to crop your image differently, you can create and move a marquee that marks the edges of your scan.
See Creating a Marquee on a Preview Image for instructions.
To adjust the image quality, click the image(s) or scan area(s) you want to modify and make the adjustments. See Adjusting the
Color and Other Image Settings for instructions. If you want to apply the adjustments you have made to all of your images, click
All.
Creating a Marquee on a Preview Image
A marquee is a moving dotted line that appears on the edges of your preview image to indicate the scan area.
You can move the marquee and adjust its size. If you are viewing the normal preview, you can create multiple marquees (up to 50) on each
image to scan different image areas in separate scan files.
Note for film or slides:
When you use the Thumbnail preview, EPSON Scan automatically creates marquees around your image(s) for you. If you
need to adjust a marquee, click inside it and click the
delete marquee icon before completing the steps in this
section. If you do not need to adjust any marquees, skip to Adjusting the Color and Other Image Settings.
To draw a marquee, move your cursor over a preview image. The pointer becomes a set of cross-hairs.
Note:
To Next Page
Loading...
