Epson Perfection V600 PHOTO - Assigning a Program to a Scanner Button; Assigning a Project Program in Epson Event Manager to a Scanner Button

Assigning a Program to a Scanner Button
Each scanner button opens a pre-selected program when you press it. The default programs they open
and the default actions they perform are described in the table below.
Button Default action
] Start
Epson Scan starts.
{ Copy
Epson Copy Utility starts.
| E-mail
Epson Scan automatically scans, then the Send File Via E-mail window appears.
T PDF The Scan to PDF window appears.
Note for Mac OS X 10.5.8 users:
Copy Utility is not supported for Mac OS X 10.5.8.
Assigning a Project Program in Epson Event Manager to a Scanner Button
You can assign any of the scanner buttons to open a program in the Epson Event Manager to make
scanning your projects even quicker.
1. Do one of the following to start Epson Event Manager:
Windows: Select the start button or Start > Programs or All Programs > Epson Software >
Event Manager.
Mac OS X: Select Applications > Epson Software, and double-click the Launch Event
Manager icon.
Perfection V600 Photo User’s Guide
Scanning Special Projects 130