1. Place your original(s) on the document table. See one of these sections for instructions.
Documents or photos: “Placing Documents or Photos” on page 19
Film or slides: “Placing Film or Slides” on page 22
2. Start Epson Scan. See “Starting Epson Scan” on page 34 for instructions.
3. Select Professional Mode in the Mode list. See “Changing the Scan Mode” on page 36 for
instructions.
4. Click the arrow to open the Document Type list and select Reflective (for scanning documents
or photos) or Film (for scanning film or slides).
5. If you selected Reflective (for scanning documents or photos) as the Document Type setting,
click the arrow in the Auto Exposure Type list and select Photo or Document.
If you selected Film (for scanning film or slides) as the Document Type, click the arrow in the Film
Type list and select Positive Film, Color Negative Film, or B&W Negative Film.
6. Click the arrow to open the Image Type list and select the detailed image type you are scanning.
Image Type setting Type of image you are scanning
48-bit Color Color photos that you may want to modify in a 48-bit image-editing program
24-bit Color Color photos
Color Smoothing Color graphics, such as a chart or graph
16-bit Grayscale Black-and-white photos with many shades of gray
8-bit Grayscale Black-and-white photos with just a few shades of gray
Black & White Documents with black text and/or line art
Note:
If you select 8-bit Grayscale or Black & White, you can also select an Image Option setting, as
described below.
Image Option Setting Description
None No Image Option setting is applied.
Dropout: Red Drops out red from the scan.
Perfection V600 Photo User’s Guide
Scanning Your Originals 47
To Next Page
Loading...
