Passbook is not loaded properly. See “Loading Passbooks” on page 23 for instructions on loading
passbooks.
Clearing a Paper Jam
If paper is not automatically ejected in the situations noted below, a paper jam may have occurred
inside the printer.
❏ When anything except for PR2 is selected as the Software or Software2 while Dual is selected as the
I/F Mode in Olivetti Mode, press the Offline button and then the F1/Eject button.
❏ Press the F1/Eject button in EPSON Mode.
❏ When Dual is selected as the I/F Mode in Wincor Nixdorf Mode or IBM Mode, press the Offline
button and then the F1/Eject button.
Follow the steps noted below to clear the paper jam.
!
Warning:
If you have just used the printer, the print head may be hot; let it cool for a few minutes before
touching it.
!
Caution:
Do not touch the white cable inside the printer.
1. Turn off the printer.
!
Caution:
Whenever you turn off the printer, wait at least five seconds before turning it back on;
otherwise you may damage the printer.
PLQ-50/PLQ-50CS/PLQ-50M/PLQ-50CSM/PLQ-50CSK User’s Guide
Troubleshooting 58
To Next Page
Loading...
