Epson PowerLite 1705c Product Support Bulletin

Page 1 of 5
PSB.2007.06.002
EPSON
P
RODUCT
S
UPPORT
B
ULLETIN
Date:
06/07/2007
Originator:
TC
PSB #:
PSB.2007.06.002
Authorization:
Reference:
TI 07-01e Rev. A
Total Pages:
5
Product(s):
PowerLite 1705c / 1715c / 1815p
Subject:
Release of EasyMP Firmware V.1.10 for USB Display support under Windows
Vista™ operating system.
This bulletin was created to inform you about the release of PowerLite 1705c / 1715c / 1815p
EasyMP firmware V.1.10 for the USB Display feature to work in Windows Vista. This bulletin
also provides instructions on where to find the firmware upgrade files and how to perform the
upgrade using a USB Thumbdrive.
Description of Change:
Main improvements and limitations by this upgrade are as follows:
Software Version Applicable
models
The improvements and limitations
USB
Display
V.1.10 PowerLite1705c /
1715c
PowerLite 1815p
[Improvements]
• Support Windows Vista.
• Add the function which shows ESSID and
hides ESSID on the portal screen of EasyMP.
• Support WEP shared Key Authentication.
[Limitations]
• There are unreadable fonts such as “2” in a
user interface.
• USB Display does not redraw the sent image
until UAC (User Account Control) is shown
on PC.
• The displayed image is an image which is
not with Windows Vista Aero.
• When using Windows Media Center and
Windows photo gallery with full screen, the
USB Display feature cannot display the
images of a full screen to a projector.
How to download the needed files
Please download the firmware file and update instructions from the Epson PowerLite 1705c or
1715c product support web sites at: http://support.epson.com
You can download the EasyMP firmware after agreeing to the EPSON END USER LICENSE
AGREEMENT.
How to distinguish new version products from old version ones
You can confirm the version number in the portal screen of EasyMP.

Epson PowerLite 1705c Specifications

General

Brand	Epson
Model	PowerLite 1705c
Category	Projector
Language	English