Epson PowerLite 1705c Quick Start Guide

“Wireless”
NOTES:
Make sure the wireless module and the Easy MP (EMP
NS Connection) software has been installed and that the
projector is configured for our network.
Your computer must have a wireless card
or built
wireless connection.
1.
Turn on the projector and adjust the image
as described earlier.
2. Press the Source Search
button on the
projector and use the directional arrow
button to select Easy MP
or press
on the projector’s remote control.
The projector displays a screen like this:
3.
From the start menu or desktop shortcut,
select EMP NS Connection.
If you see this screen:
Select “Advanced
Connection Mode
“
Set the selected Connection Mode as the
default mode for future connections.”
Click OK.
Make sure the wireless module and the Easy MP (EMP
NS Connection) software has been installed and that the
or built
-in
Turn on the projector and adjust the image
button on the
projector and use the directional arrow
or press
Easy MP
on the projector’s remote control.
The projector displays a screen like this:
From the start menu or desktop shortcut,
Connection Mode
” and
Set the selected Connection Mode as the
default mode for future connections.”
4.
If you see this screen,
5. You see this screen:
Once the name of your projector appears,
select it and click
Connect
•
If a projector is “in use” and
“locked” to prevent interruption,
you won’t be able to select it.
•
If you see a message asking for a
keyword, enter the four digits that
appear on the
Screen
and click
You see the image on your monitor
transmitted to the projector and a
control bar appears on the computer
screen.
You can minimize this control bar to the
task bar.
When you’re finished with your
presentation, click
Disconnect
control bar.
Press the power button twice to turn off.
If you see this screen,
click Yes.
Once the name of your projector appears,
Connect
.
If a projector is “in use” and
“locked” to prevent interruption,
you won’t be able to select it.
If you see a message asking for a
keyword, enter the four digits that
appear on the
Easy MP Network
and click
OK.
You see the image on your monitor
transmitted to the projector and a
floating
control bar appears on the computer
You can minimize this control bar to the
When you’re finished with your
Disconnect
on the
Press the power button twice to turn off.

Epson PowerLite 1705c Specifications

General

Brand	Epson
Model	PowerLite 1705c
Category	Projector
Language	English