Connecting to Computers, USB Devices, and Other Equipment 47
Connecting an RGB Video Source
1. Locate the VGA computer cable provided with the projector.
2. Connect the cable to the video port on your player and the
Computer1 or Computer 2 port on the projector.
3. If you want to play sound through the projector, see page 49 for
instructions on connecting audio cables.
4. If you don’t need to make any other connections, see page 18 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, press the
Search button on the
remote control or the
Source Search button on the projector’s
control panel and select
Computer1 or Computer2 as the image
source.
note
Make sure the Input Signal
setting in the Signal menu is
set to Auto or RGB Video
(see page 93).
Connect to RGB video source
To Next Page
Loading...
