Epson PowerLite 915W - Connecting to a Composite Video Source

2. Connect the VGA connector to the projector's Computer port.
1 Computer1 or Computer2 port
If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's
Signal menu.
Parent topic: Connecting to Video Sources
Related references
Input Signal Settings - Signal Menu
Connecting to a Composite Video Source
If your video source has a composite video port, you can connect it to the projector using an optional
RCA-style video or A/V cable.
1. Connect the cable with the yellow connector to your video source's yellow video output port.
2. Connect the other end to the projector's Video port.
1 Video port
Parent topic: Connecting to Video Sources
33