Related references
Input Signal Settings - Signal Menu
Image Quality Settings - Image Menu
Projector Feature Settings - Settings Menu
Solutions When There is No Sound or Low Volume
If there is no sound when you expect it or the volume is too low, try the following solutions:
• Press a Volume button on the remote control or projector control panel to adjust the volume.
• Press the A/V Mute button to resume video and audio if they were temporarily stopped.
• Press the Source Search button to switch to the correct input source, if necessary.
• Check your computer or video source to make sure the volume is turned up.
• Check the audio cable connections between the projector and your video source.
• If you do not hear sound from an HDMI source, set the connected device to PCM output.
• Make sure any connected audio cables are labelled "No Resistance".
• If you are using the USB Display function, turn on the Output audio from the projector setting in the
Epson USB Display Settings program on your computer.
Parent topic: Solving Image or Sound Problems
Solutions to Microphone Problems
If there is no sound when you use a microphone connected to the projector (not available for PowerLite
92/93), try the following solutions:
• Make sure the microphone is securely connected to the projector.
• Adjust the Mic Input Level and Plug-in Power settings as necessary in the projector's menus.
Parent topic: Solving Image or Sound Problems
Related references
Projector Feature Settings - Settings Menu
Projector Setup Settings - Extended Menu
Related tasks
Connecting a Microphone
152
To Next Page
Loading...
Need help?
General