Adjusting the Projector Status Display
You can adjust the contrast and the backlight duration on the status display screen.
1. Press the right or left arrow button to select the Setting menu.
2. Press the down arrow button to display the Contrast.
3. Press the left or right arrow button to adjust the contrast.
4. Press the down arrow button to display the Lighting Time.
5. Press the left or right arrow button to adjust the length of time the backlight stays on (default is 30
seconds).
Parent topic: Projector Status Display
Projector Status Display Messages
Selections on the status display menus let you view information about the projector and its operation.
Status Information menu
Selection Options Description
System — See the System status
information table at the end of
this topic
Source Computer Displays the source currently
being used
BNC
Video
S-Video
HDMI
DVI-D
SDI
LAN
HDBaseT
205
To Next Page
Loading...
