If you are using Macintosh, see “Configuring the Network Interface (For Macintosh Users)” on page
41.
Configuring the Network Interface (For Windows Users)
Configure the network interface for use on the TCP/IP network and install the printer driver on your
computer.
1. Insert the Software CD-ROM in the CD-ROM drive.
2. The Software Installation screen opens automatically.
If the Software Installation screen does not appear, double-click EPSETUP.EXE on the CD-ROM.
3. Make sure that all applications are closed, and then click the Set up the printer via a network
connection button.
Note:
If the Windows Security Alert window appears, click the Unblock button; otherwise the printer is
not listed on the screen of EpsonNet EasyInstall.
4. EpsonNet EasyInstall starts. Select the printer and then click the Next button.
EPSON Network Guide
How To 38
To Next Page
Loading...
