196
You see the Protocol Emulation screen.
4. Select one of the following and press Enter:
• Type P for Panasonic projectors
• Type M for Mitsubishi projectors
• Type N for NEC projectors
• Type S for Sony projectors
5. Turn the projector off and on again to enable the control code you selected.
Parent topic: Adjusting Projector Features
Viewing 3D Images
You can use two projectors to project and view passive 3D images (Pro
L1500UH/L1500UHNL/L1505UH/L1505UHNL).
The following optional items are required:
• Polarizer
• Passive 3D glasses
• A mount to stack the projectors
• Silver screen designed for passive 3D images
See the instructions supplied with the optional equipment for setup and use.
Parent topic: Adjusting Projector Features
Saving Settings to Memory and Using Saved Settings
You can save customized settings and then select the saved settings whenever you want to use them.
1. Turn on the projector and display an image.
2. Press the Menu button.
To Next Page
Loading...
