261
Parent topic: Projector Information Display - Info Menu
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the Reset All Config option on
the Reset menu.
You can also reset the saved names and settings in the Save Memory list using the Reset All Memories
option.
You can set the default settings for the following settings using the User Default Setting option:
• Light Source Mode
• Brightness Level
• Constant Brightness
• A/V Output
• Standby Mode
• Standby Confirmation
• Messages
• Beep
• Sleep Mode
• Shutter Timer
• Shutter Release
• Color Mode
• Wireless Mode
• Wired LAN DHCP
To reset all settings to the selected User Default Setting, select the Reset All (User Default) option.
You need to enter a password to reset the settings. The default password is 0000, which you should
change to your own password.
To Next Page
Loading...
