Item Description
Printer Setup Roll Paper
Setup
Auto Cut
On
Choose On to automatically cut roll paper using
the built-in cutter as each page is printed, Off to
disable auto paper cutting.
Off
Refresh
Margin
On
If On is selected during borderless printing, the
printer will automatically trim the leading edge to
remove any ink stains that may have been left by
the previous copy; to disable this feature, choose
Off. However, borderless printing is not
guaranteed on this printer.
Off
Page Line
On
If Auto Cut is Off, you can choose to print (On) or
not print (Off) cut lines on roll paper. Cut lines are
not printed if Auto Cut is On.
Off
Roll Paper
Margin
Normal
When set to Normal, the top and bottom margins
are 15 mm, and the left and right margins are 3
mm.
Except for 15mm, the left and right margins for all
other settings are 3 mm.
U “Printable area” on page 37
Top15mm/
Bottom15mm
Top45mm/
Bottom15mm
Top15mm/
Bottom150mm
3mm
15mm
Roll Paper
Remaining
On
Select whether to display/record (On) or not to
display/record (Off) the amount of remaining roll
paper. Roll Paper Remaining can be enabled by
selecting On and entering the length of the roll.
Off
Remaining
Alert
1 to 15 m (4 to 50 ft)
Displayed when On is selected for Roll Paper
Remaining.
Set within a range from 1 to 15 m (4 to 50 ft) to
display a warning when the amount of remaining
roll paper drops below that limit. You can set in 1 m
(4 ft) increments.
SC-B6000 Series User’s Guide
Using the Control Panel Menu
48
To Next Page
Loading...
Need help?
General
