Item Description
Advanced
Settings
Roll Paper
Tension
Low
Select High or Extra High if the paper wrinkles
during printing.
Roll Paper Tension can be specified separately for
each paper type using the Custom Paper Setting
option in the Paper menu.
When Custom Paper is chosen for Select Paper
Type, the printer will use the value selected for
Roll Paper Tension in the Custom Paper
Setting.
This setting takes effect if no custom roll paper
tension is specified.
Normal
High
Extra High
Less Head
Scuffing
On If the paper is thick, the print head may scuff the
print surface. Choose On to prevent scuffing. This
option can be used to temporarily change the
value selected for Custom Paper Setting > Platen
Gap in the Paper menu. Note, however, that On
has no effect when Wider is selected for Platen
Gap.
Off
Drying
Time Per
Page
Off, 0.1 to 60
minutes
Specify how long the printer pauses to allow the
ink to dry after printing each page; select Off or
choose from values between 0.1 and 60 minutes.
Depending on the ink density or paper type, the
ink may take a while to dry. If the ink blurs on the
paper, set a longer time for drying the ink.
The longer the drying time, the more time required
for printing.
Paper Size
Check
On Choose whether the printer automatically detects
(On) or does not detect (Off) the paper width. Try
choosing Off if a paper setting error is displayed
when the paper is correctly loaded. Note, however,
that the printer may print outside the paper when
Off is selected. If it prints beyond the edges of the
paper, the inside of the printer becomes dirty with
ink. We generally recommend to operate with this
setting set to On.
Off
Paper
Skew
Check
On
If On is selected, an error will be displayed in the
control panel and printing will stop if the paper is
skewed; select Off to disable this feature. On is
recommended in most circumstances as skewed
paper may cause the printer to jam.
Off
Cleaning
Cycle
Off Select when to perform scheduled head cleaning;
you can select from Off or after every 1 to 10 pages.
If Off is selected, no Cleaning Cycle is used. If you
choose a number between 1 and 10 pages, head
cleaning will be performed automatically before
printing occurs after the set number of pages is
printed.
Every 1 to 10 pages
Restore Settings Yes
Select Yes to restore all printer settings to default
values.
No
SC-B6000 Series User’s Guide
Using the Control Panel Menu
49
To Next Page
Loading...
Need help?
General
