Item Description
Printer Status Firmware Version xxxxxxx,x.xx,xxxx You can see the firmware version.
Option Status Lists the optional accessories currently connected to the printer and
available for use.
Show Total Prints
XXXXXXX m
2
(XXXXXX ft
2
)
View the total area printed (six-figure maximum).
Print Status Sheet
Press the Z button to print a list of current printer settings.
Choose this option to view settings at a glance.
Network Setup IP Address Setting
Auto Select whether to use DHCP to set the IP address
(Auto), or to set the address manually (Panel).
Choose Panel to enter the IP address, Subnet
Mask, and Default Gateway. Contact your system
administrator for detailed information.
Panel
Print Status Sheet
Press the Z button to print a list of network settings. Choose this option
to view network settings at a glance.
Restore Settings Yes
Select Yes to restore all network settings to default
values.
No
Power Settings Sleep Mode 5 to 240 minutes The printer enters sleep mode automatically when
there are no errors, no print jobs being received,
and no control panel or other operations are
performed for the selected period. Use this option
to choose the period before the printer enters
sleep mode.
U “Turning Off the Power Using Power Off Timer”
on page 38
Power Off Timer Off The printer turns off automatically when there are
no errors, no print jobs being received, and no
control panel or other operations are performed
for eight hours.
The delay before the printer turns off can be
selected from values between 1 and 24 hours in
increments of 1 hour.
Choose Off to prevent the printer turning off
automatically.
1 to 24 hours
Restore Settings Yes
Select Yes to restore all Power Settings to default
values.
No
SC-B6000 Series User’s Guide
Using the Control Panel Menu
50