Epson SC-F2100 SERIES Setup Guide

10
JA
 設置
EN Installing TC
 安裝
[ 4 ] [ 5 ]
[ 6 ]
c
廃インクチューブは、長い方を廃インク排出口（左）、短い方を廃インク排出口（右）に接続します。
Connect the waste ink tube so that the longer part is connected to the waste ink outlet on
the left, and the shorter part is connected to the waste ink outlet on the right.
連接廢墨管，較長的那一端連接至左測的廢墨排出孔，而較短的那一端連接至右側的廢
墨排出孔。
c
取り外した部品は輸送時に必要です。保管してくだ
さい。
You need these removed parts when transporting
the printer. Store them in a safe place.
當搬運印表機時，您會需要這個移除的部品。
請將它保存在安全之處。
[ 7 ]

Epson SC-F2100 SERIES Specifications

General

Ink Type	Epson UltraChrome DG ink
Maximum Print Resolution	1440 x 1440 dpi
Connectivity	USB, Ethernet
Printable Area	Up to 16" x 20"
Ink Colors	Cyan, Magenta, Yellow, Black, White
Printer Type	Direct-to-Garment Printer
Operating System Compatibility	Windows, Mac
Platen Sizes	Small, Medium, Large
Print Speed	Up to 27 seconds for a light garment