c
Important:
The printer detects the highest part of the print
surface and adjusts the height. If there are any
creases or slack remaining as shown in the
illustration below, the distance between the
print head and the print surface may increase
and print quality may decline. Flatten the
T-shirt so that there are no creases or sagging.
Note:
When the grip pad tool becomes dirty, make sure
you wipe it with a damp cloth.
G
Tuck in the T-shirt so that it does not drape over
the movable base.
Loading on a Platen without a
Grip Pad
When loading a T-shirt (media) on a platen without a
grip pad, use the frame supplied with the platen.
You can check the procedure in a video on YouTube.
Epson Video Manuals
Buttons that are used in the following operations
A
Press the P button to turn on the printer.
B
Check that the platen is ejected forward.
If it is not ejected, press the } button to move the
platen forward.
C
Remove the frame from the platen.
D
Load the T-shirt so that the shoulders are at the
front.
SC-F2100 Series User's Guide
Basic Printing
47
To Next Page
Loading...
Need help?
General