Settings item Settings value Explanation
Reduce/Enlarge
Auto Fit Page On
Set to On to print so that the short edge of the original fits the
width of the paper loaded in the printer.
If the short edge of the document is wider than the paper, printing
will be at actual size.
If paper is not loaded as set in Paper Source of Basic Settings, this
cannot be set to On. Furthermore, if the Paper Source setting is
changed without replacing or loading the paper after setting this
to On, this setting is returned to Actual Size.
If the printer is unable to detect the width of the paper, an error
will occur when the Print button is touched.
Off
*
Custom Size
Actual Size
*
,
A4, A3, Super A3,
A2, Super A2,
A1, Super A1,
Letter, Legal,
US B (11x17in),
US C (17x22in),
US D (22x34in),
ARCH A (9x12in),
ARCH B (12x18in),
ARCH C (18x24in),
ARCH D (24x36in),
ARCH E1 (30x42in),
ARCH E (36x48in),
ISO B4, ISO B3, ISO B2,
JIS B5, JIS B4, JIS B3,
JIS B2,
610 x 762 mm,
30 x 40 cm,
40 x 60 cm,
50 x 70 cm,
60 x 90 cm,
User-Defined
Select the output size. To the left of each size, the percentage of
enlargement of the selected document size is displayed. If the
desired size is not in the list, set the desired size in User-Defined.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Using the Menu
163
To Next Page
Loading...
Need help?
General