Settings item Settings value Explanation
Original Type
Text/Line Drawing
*
Suitable for copying and scanning drawings printed on standard
plain paper. This is also suitable for posters and so on that
contain images.
Tracing Paper Suitable for copying and scanning drawings printed on tracing
paper.
This reduces the background color for tracing paper.
Blueprint Suitable for copying and scanning blueprints.
This reduces the background color for blueprints.
Advanced
Original Size
Auto Detect
-
The default setting of Auto Detect is recommended in most
situations. Note that, depending on the original, it may not be
possible to detect the width correctly even when the setting is
Auto Detect. Similarly, tracing paper and the optional carrier
sheet are not detected automatically. In such cases, change from
the standard size and specify a width of your choosing. If the
desired size is not in the options, then select User-Defined, and
enter the length and width of the original.
ISO A Display supported sizes
for originals
US-ANSI
US-ARCH
JIS B
ISO B
User-Defined Display the Original Size
Input screen
Top Offset
0.0 to 100.0mm (0.0
*
)
0.00 to 3.94inch (0.00
*
)
If you do not want to copy the top margin of the original, you
can adjust the top, and then copy the original. Enter the value for
the length from the top of where you want to start copying.
If the carrier sheet is loaded, set the value to 19 mm.
Page Margins option
Clip By Margins
*
Add margins (areas of in the following illustration) inside the
output size (areas of
in the following illustration) set in the
Reduce/Enlarge settings. When there is a print object in the
margin section, it is clipped and not printed.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Using the Menu
166
To Next Page
Loading...
Need help?
General